DVB Support - Emunation

EmuNation 4.1.0.15

Map39 and Map3B handling corrected.
Slight Newcamd EMM processing tweak.

EmuNation 4.1.0.14

Map22 handling tweaked to correct occasional freezing.

EmuNation 4.1.0.13

Map22 handling corrected.

EmuNation 4.1.0.12

Map2F handling added.

EmuNation 4.1.0.11

Corrections to allow EMM processing for Nagra3.(Don't get too excited, N3 still only works for cardsharing).
Modifications to allow better EMM-G/S/U processing so if a PPV is purchased, the card can be updated by one of the connected clients.
Newcamd only and confirmed working correctly with RQCS and NewCS servers. You must be authorized to pass EMM by the server operator.
Corrections to gbox code (not 100% sure that it works, let me know if you try it).

EmuNation 4.1.0.10

Map2e handling addition.
Added a few more console messages to better show what is going on during cardsharing.
Added DVBMax to list of applications known to work with Emunation in this readme.

EmuNation 4.1.0.9

Cardclient fix for motorized dishes.
Newcamd fix to allow for Nagra3.
Change for DVBPlus to work with cardclients (sat position).

EmuNation 4.1.0.8

Fix for DN latest..

EmuNation 4.1.0.7

Hopefully the last fix for MDAPI and MT crashes.Thanks to a helper for the remote debugging. You know who you are.

EmuNation 4.1.0.6

Workaround hack for MyTheater (older versions) and Agarwals MDAPI filter apps such as MediaPortal problem which was crashing EmuNation on some channel changes.
Minor fix for potential problem switching from unscrambled to scrambled channels.
Fix to insure that the proper caid is always being used. Applies to all systems but was required for cardsharing to work properly.

EmuNation 4.1.0.5

Minor fix for freezing that some were seeing.
Cardshare EMM processing working for radegast.
You still shouldn't enable EMM processing on your client without permission from the server operator.

EmuNation 4.1.0.4

Map3A timing correction.
Cardshare EMM processing working for both newcamd.You shouldn't enable EMM processing on your client without permission of the server operator.

EmuNation 4.1.0.3

Map3a handled.
Corrected problem with nagra3 priority reading from ini file and made corresponding change to ini file.
*Make sure you have the nagra3 priority set to -19 in the INI

EmuNation 4.1.0.2

Radegast cardclient working compliments of tryit@DVBN. Newcamd already worked.cardclient.conf sample file added to distribution.Works with N3 *if* the server works with N3. Newcamd has been shown to work with N3 and emunation already. Radegast doesn't work with N3 yet but supposedly is close. For now you can only have one line in cardclient.conf active at a time so
to switch from bev to dish (for example) you need to swap the conf lines and restart the DVB application.

Tweaks to the priority code.

Four additional notes:
1) EMM processing does not work for newcamd. so do not turn it on.
2) Before posting that this does not work, make sure you have the ports open in your firewall/router.
3) If you have problems running as you did before you can try setting (in emunation.ini):
[System Priorities]
Nagra3=-19
4) To run as a cardclient set (in emunation.ini):
[System Priorities]
Cardclient=-2

EmuNation 4.1.0.1

Map 46 added.

EmuNation 4.1.0.0

Map 3d added.
Stub Nagra3 class created. Don't get excited, it does not work.
This is just prepwork for (hopefully) the future.

EmuNation 4.0.0.0

MAP3C correction.
Added set computer time and date from the DVB stream capability.New ini file entry needed under [Menu Options] SetClock=1 to set the clock on first channel tune. Menu item, under 'options', turns function on/off and menu item to set clock now.The default for this option is off.Note 1: Console display of time set is in UTC/GMT, so don't be surprised by it being off by several hours from your current local time.Note 2: Vista users, the DVB program app must "Run As Administrator" for time set to work. Turning User Access Control (UAC) off may also work.
[rant]I cannot possibly describe how much I detest Vista UAC.[/rant] This feature shamelessly stolen from emun-sc

EmuNation 3.0.5.3

Fix below removed due to instability with Dream:

Fix for crash when changing from encrypted to unencrypted channels that some clients were experiencing.

EmuNation 3.0.5.2

Added DVBPlus to the list of recognized client applications.
Added ability to set encryption system priority in INI file (see the [System Priorities] section of the supplied file).EmuNation will keep the legacy priorities if your INI file does not have this section.
Fix for crash when changing from encrypted to unencrypted channels that some clients were experiencing.

EmuNation 3.0.5.1

Map3C and MAP3B added. Map3E updated..

EmuNation 3.0.5.0

Added support Irdeto2

Irdeto2 desteği eklendi..

EmuNation 3.0.4.13

Better Map25 fix.
Updated timings on a few other Maps.

EmuNation 3.0.4.12

Map25 fix

EmuNation 3.0.4.11

Bug fix to correct problem in some clients where if you change channels too fast or select the same channel twice in a row, no picture will appear for 15-20 seconds.

EmuNation 3.0.4.10

Quick fix for Dish outage.

EmuNation 3.0.4.7 - 3.0.4.9

Correction for the latest trickery from our friends.
Corrected PMT menu option.
Correction for the latest DN action.
Adds a menu item and ini file item to turn PMT processing on and off just like EMM and ECM processing.
Some programs are supplying PMT, so there is really no need to process it on channel change. This has
the effect of potentially speeding up channel changes. Apps that have been shown to supply PMT so far
are DVBDream and MyTheater. With these apps you should be able to turn off PMT processing with no
ill effects, and potentially speed up your channel changes. The default is PMT processing on.
I also reformatted the Emunation.ini file so that the comments describing the options stay in the
file after you change the option from the Emunation menu.

EmuNation 3.0.4.6

More adjustments to the interruptable MECM logic.Change to correctly identify older versions of ProgDVB and prevent a crash. Thanks to Skywise for helping to figure out the ProgDVB fix.

EmuNation 3.0.4.5

Interruptible timing for MAP3E added.

EmuNation 3.0.4.4

MAP 21 added.

EmuNation 3.0.4.3

Interrupt handling modifications for latest NA MECM.

EmuNation 3.0.4.2

MAP 38 added

EmuNation 3.0.4.1

Fix for latest NA providers MECM.

EmuNation 3.0.3.3

Added ability to 'share' most of the EmuNation files among multiple
applications and/or PIP instances. See the 'To run multiple programs'
text below for details. Leaving the ini file the way it is results
in the same behavior as EmuNation always had. tryit@DVBN had the idea
(as did a few others) and it seemed like a useful feature.

To run multiple programs (MT and TSR for example), or multiple PIP instances (Dream for example):
- Place all the emunation files (except emunation.dll and emunation.ini) and the
nagra subfolder in a folder somewhere
- Place the pthreadVC2.dll file where it needs to be for your application(s) (see above).
- Put the EmuNation.dll and EmuNation.ini files in the (MD)plugins directory as shown above.
- Modify each EmuNation.ini file so that the S_K_location= entry points to the
folder that you created in the first bullet.
- The MECM files, softcam file etc. will now all be shared among all of your applications.

EmuNation 3.0.2.4

Map29 fix compliments of mfong@DVBN.

EmuNation 3.0.2.3

Nagra CPU fix compliments of mfong@DVBN.

EmuNation 3.0.2.2

CRC fix for Dish MECM compliments of mfong@DVBN and a cast of several.

EmuNation 3.0.2.1

Latest BEV MECM correction.
Non-max parser EMM parser was updated. Big parser update: It now handles payloads split across multiple packets and also splits
multiple EMMs within a packet. It seems to get close to 100% of the EMM data it receives,and not seeing any non-EMM packets. The original was probably 10-20% and the previous one was probably 30-40% (though most of the EMMs needed probably fall into that category). The DVB spec says the packets (or payload?) can be up to 256 bytes, not the 184 bytes that the old code was assuming. The 9F and Bx processing in nagra were fixed.All by mfong@DVBN

MyTheater observations. MyTheatre loses more EMM packets than other DVB applications (probably because it uses more CPU). It also duplicates packets for some reason. Itsperformance might be slightly worse than other DVB applications. Not much we can do about that at the EmuNation level.

Some merging with the sasc/vdrcode including the HW mapper class.Bev now uses the included EEP09_102 bin file instead of EEP08_102 bin.Fixed buffer overrun in the max parser code. That might have been what was crashing TSReader. All by mfong@DVBN

EmuNation 3.0.1.1

Globecast fix by icur12@DVBN. Note that this is untested at the moment.
Bug introduced back in version 3.0.0.6 corrected by mfong@DVBN

EmuNation 3.0.1.0

CPU timing table change for DN latest MECM compliments of SASC developer anisota.
MECM57 changes compliments of mfong@DVBN.

EmuNation 3.0.0.9

Brute force map57 MECM handling by mfong@DVBN
Determine provider ID based upon satellite location and TP Frequency by mfong@DVBN.
See the Providers.map file for the current supported mappings. If you have
additional entries PM them to me (CodeMonkey@DVBN) and I will add them.
The transponder frequency filter is coded but mostly untested.

EmuNation 3.0.0.8

Working Globecast provider (C101 - No AU) compliments of tryit@DVBN.
B1 processing change tweak compliments of mfong@DVBN
Logging fix compliments of tryit@DVBN.

EmuNation 3.0.0.7

Computed MAP3E compliments of sizemore@DVBN
B1 processing changes compliments of mfong@DVBN and tryit@DVBN.

EmuNation 3.0.0.6

Map3E timing tweaks compliments of mfong@DVBN and NooneImportant@DVBN.

EmuNation 3.0.0.5

Map3E compliments of mfong@DVBN and NooneImportant@DVBN.

EmuNation 3.0.0.4

BEV HW_CRC_CONTROL fix compliments of mfong@DVBN.
Correction for random crash compliments of Smilex745@DVBN.

Note not a dish fix, just gets bev back.

EmuNation 3.0.0.3

Corrected timer logic compliments of mfong@DVBN and supporting cast on DVBN/IRC.

EmuNation 3.0.0.2

Map22 timing improvements compliments of nooneimportant @DVBN and mfong@DVBN.
TSReader fix compliments of icur12@DVBN

EmuNation 3.0.0.1

Map22 compliments of nooneimportant @DVBN and mfong@DVBN.

EmuNation 3.0.0.0

Dynamic handling of MECM courtesy of mfong and noneimportant.
Corrected writing options to ini file logic.

EmuNation 2.0.0.14

MECM40 fix by mfong@dvbn

EmuNation 2.0.0.13

Finally, the bug that required you to change channels twice when switching
providers was fixed thanks to tryit@DVBN

EmuNation 2.0.0.12

Dish Network AU Fix

EmuNation 2.0.0.10

Various corrections by mfong@dvbn for fixing HD and reworking of the Rev248 morph code.

EmuNation 2.0.0.9

Latest KillerCoder fix.

EmuNation 2.0.0.8

Bandaid for latest MECM 40 action compliments of KillerCoder.
Fixed problem writing new IDEA keys to softcam file if the key didn't already exist.
Added Jammyjams CAID 0x1816 bandaid.

EmuNation 2.0.0.6 Yenilik / new ?

Kuzey Amerika'daki Dish AU Düzeltilmiş

Yet another reg 16 fix for Dish. This fix goes back to
a version 2.0.0.3 AU fix by "D".

EmuNation 2.0.0.5 Yenilik / new ?

Kuzey Amerika' daki BEV paketinin yeni ECM si için düzeltmeler yapılmış..

Temporary fix for BEV funky new ECM.

EmuNation 2.0.0.4 Yenilik / new ?

-BEV, Dish ( Amerikadaki paketler ) AU ları düzeltilmiş..

Prettier fix for same problem 2.0.0.3 addressed :) (Thanks to KillerCoder for this one.)
Proper register 16 handling. Thanks to "d" fpr this.
Added a graphic to the monitor dialog (I was jealous because vplug had one :) ).
*If someone with artistic aptitude wants to create a better one just let me know :)

EmuNation 2.0.0.2 Yenilik / new ?

$16 Bozukluk yaratan kodlamalar nagra işleme tarzıyla değiştirilmiş..

KillerCoders $16 changes to nagra handling

EmuNation 2.0.0.1

Emunation Açık kaynak kodlu özelliği olan ilk ve tek Softcam emulator plugindir..Kaynak kodlarını görmek için source paketini siteden indirebilirsiniz..Plugin in kaynağı yani ilk yazan bveb nick indeki bir Türk arkadaşdır..

Şuan için Kuzey Amerikalı bir programcı tarafından devam ettirilmektedir..Bu yüzden de avrupadaki şifreli yayınlara karşı pek etkinliği bugüne kadar olmadı..

Şuan Nagra-1, 2 Seca1, Via1, Constant CW ( BISS ) yayınlarını açabilir..

Yani şuan için S2emu dan Cryptoworks, vplug dan Cryptoworks ve TPS yi açamama eksikliği vardır..

Buna karşın CPU kullanımı aynı s2emu gibi vplug ın kullandığından daha azdır..

Bu nedenle diğer pluginlerde bir sorun yaşıyorsanız emunationu alternatif olarak kullanabilirsiniz..

Pluginin çalışması için sistemde Microsoft Visual C++ 2005 Redistributable paketi yüklü olmalıdır..Kullandığınız program açılışda hata verirse veya açılırda eklentilerde emunation görünmezse bilinki bu paket yüklü değildir..Sistemde olmazsa aşağıdaki linkden indirin..

http://www.microsoft.com/downloads/details.aspx?familyid=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en

Paketin içinde çıkan pthreadVC2.dll yi kullancağınız programın kök dizinine yani program exe si yanına, diğer emunation dosyası içinde dosyaları programların plugin klsörüne çıkartın.. FOR North America klasörü içindeki ayar güney amerika için olduğundan onu dikkate almayın..

Bu şekilde Astra daki D+, 23.5 deki Kabel, Premiere, Hotbird deki SRG, MTV France gibi via1 yayınlar seca1 li rai ve bütün uydulardaki softcam da known bölümündeki yazan keyi olan BISS kanalları açılır..Tabiki Hispasat komple açılır ve keyi olursa Hotbird deki Polsat da açılır..

Emunation Supported System

Nagra-1 (Tested 4W Sport Club)
Nagra-2 ( Tested Astra 19.2 D+, Astra 23.5 Kabel and Premiere, 13E Polsat,TV Globo, 1W Digi TV)
Seca-1 ( Tested Hotbird Rai, 4W Mediatech)
Via-1 ( Tested Hotbird SRG and some via1 channel ( MTV France, VH1, Babe TV.....)
Irdeto-1
BISS ( Constant CW )